Resumo O lúpulo é uma nova cultura no Brasil. A cultura de tecidos pode ser uma técnica importante para a propagação rápida do lúpulo. Este artigo tem como objetivo caracterizar respostas de diferentes genótipos sob diferentes reguladores de crescimento através da inter-relação de variáveis de resposta importantes para o crescimento in vitro. Três genótipos foram cultivados em seis meios de cultura com diferentes combinações de reguladores de crescimento, BAP (6-benzilaminopurina), AIA (ácido 3-indolacético) e GA3 (ácido giberélico). As médias foram comparadas por contrastes ortogonais e a inter-relação das variáveis de resposta foi realizada por análise de trilha. Os genótipos americanos apresentaram desenvolvimento radicular favorável sob a combinação BAP + AIA, enquanto o uso do AIA melhorou o desenvolvimento da parte aérea. A origem dos genótipos foi importante para definir o melhor protocolo para o cultivo in vitro. O coeficiente de trilha mostrou que a variável número de brotos tem um efeito direto mais forte no número de segmentos nodais. Adicionalmente, em experimentos com cultura de tecidos, o uso de uma covariável e distribuição de erro adequada aumentou significativamente a precisão experimental.

Abstract Hops is a new culture in Brazil. Tissue culture can be an important technique for rapid hop propagation. This paper aims to characterize responses from different genotypes under different growth regulators through the interrelationship of response variables important to hop in vitro growth. Three genotypes were cultivated in six culture media with different combinations of growth regulators, BAP (6-benzylaminopurine), IAA (3-indolacetic acid) and GA3 (gibberellic acid). The means were compared by orthogonal contrasts and the interrelationship of the response variables was performed by path analysis. American genotypes showed favorable root development under the BAP + IAA combination, while the use of IAA improved shoot development. The origin of genotypes was important for defining the best protocol for in vitro cultivation. The path coefficient showed that the variable number of shoots has stronger direct effect on the number of nodal segments. Additionally, in tissue culture assays, the use of a covariable and proper error distribution significantly increased experimental accuracy.

SUMMARY: The posterior interosseous nerve (PIN) has been used as a synonym or immediate continuation of the deep branch of the radial nerve as it emerges in the posterior compartment of the forearm. Its origin is not clear either, being described as a posterior interosseous nerve to its proximal, intermediate or distal path to the supinator muscle. The objective of this review is to detail the vision of various authors regarding the origin and path of the PIN, proposing a correct terminology for these structures. A bibliographic review of several texts and some articles used for the teaching of human anatomy, published between the 1800s and the present day, was carried out. In the search, inclusion criteria were determined that considered human anatomy, written in Spanish, French or English and that alluded to the PIN. After the initial exploration, 18 books were located, coming from France, Russia, Spain, Argentina, the United States, Canada, the United Kingdom, Germany, India and Mexico. A more precise description of the PIN, in terms of origin, path and function, is that postulated by the French literature, corresponding to a terminal origin of the deep branch of the radial nerve, after emitting its muscular branches. This thin nerve runs attached to the interosseous membrane to then advance through the fourth extensor compartment, distributing itself in the dorsal carpal joints to which it innervates sensitively and proprioceptively.

RESUMEN: El nervio interóseo posterior (NIP) ha sido utilizado como sinónimo ocontinuación inmediata del ramo profundo del nervio radial (RPNR) al emerger en el compartimiento posterior del antebrazo. Su origen tampoco es claro, describiéndose como nervio interóseo posterior a su trayecto proximal, intermedio o distal al músculo supinador. El objetivo de esta revisión es detallar la visión de diversos autores respecto al origen y trayecto del NIP, proponiendo una correcta terminología para estas estructuras. Se realizó una revisión bibliográfica de varios textos y de algunos artículos utilizados para la enseñanza de la anatomía humana, publicados entre los años 1800 y la actualidad. En la búsqueda, se determinaron criterios de inclusión que consideraban, anatomía humana, escritos en español, francés o inglés y que aludieran al NIP. Tras la exploración inicial se localizaron 18 libros, procedentes de Francia, Rusia, España, Argentina, Estados Unidos, Canadá, Reino Unido, Alemania, India y México. Una descripción del NIP más precisa, en cuanto al origen, trayecto y función, es aquella postulada por la vertiente francesa, correspondiendo a un origen terminal del ramo profundo del nervio radial, luego de emitir sus ramos musculares. Este delgado nervio transcurre adosado a la membrana interósea para luego avanzar por el cuarto compartimiento extensor, distribuyéndose en las articulaciones dorsales del carpo a quienes inerva sensitiva y propioceptivamente.

Abstract This article presents the theoretical analysis of a signal coupling between a proposed Photonic Crystal Fiber (PCF) and a Conventional Fiber with Step Index (CFSI) system. In this analysis, the Finite Element Method (FEM) and Beam Propagation Method (BPM) are applied together with Daubechies wavelets as basis function and described in the mathematical formulation. The simulations were performed casting the PCF signal into CFSI core using the PCF refractive index. For simulation purposes, the cladding material refractive index was set as 1.5% lower than the core index. The application of Daubechies wavelets as basis functions in BPM analysis presented insertion loss around 3.8% during the fiber coupling.

SUMMARY: The nerve for the brachioradialis muscle (BR) has been used in nerve transfers for recoveries in functions of the hand as a consequence of lesions affecting the brachial plexus. With the purpose of investigating the number and biometric location of the primary branches coming from the radial nerve and motor points with respect to a reference point located in the elbow region, thirty upper limbs of Brazilian adult individuals from the State University of Sciences of Saúde de Alagoas, Maceió, Brazil were used. The samples were fixed in 10 % formaldehyde solution, of which 15 were right and 15 left. As a reference point, a line was used that passed through the most prominent parts of the humeral epicondyls, bi-epicondilar line (BEL). With respect to the nervous origin for the BR muscle, all the branches originated from the radial nerve (RN). The average number of primary branches (PB) was 1.53 (SD 0.73). In 18 samples (60 %) only one PB was observed; in 8 cases (26.7 %) 2 PB were found, while in 4 cases (13.3 %) of the sample 3 PB were observed. Regarding the biometric location of the origins of PB, it is important to mention that all were located proximal to the BEL. On average, these were located at 38 mm (SD 0.9); 29 mm (DS 1.2) and 22 mm (DS 1.0) for the first, second and third PB, respectively. In relation to the motor points (MP), in 4 cases (13 %) 1 MP was observed as direct penetration of the PB, in 13 cases (43 %) there were 2 MP, in 8 cases (27 %) they found 3 MP and in 5 cases (17 %) 4 MP were observed. In three cases (10 %) the innervation towards the BR muscle emitted nerve fillets towards the extensor carpi radialis longus muscle. The results presented in this investigation are an important contribution to nerve blocks, electrical stimulations and nerve transfers.

RESUMEN: El nervio para el músculo braquiorradial (BR) ha sido utilizado en transferencias nerviosas para recuperaciones en funciones de la mano como consecuencias de lesiones que afectan el plexo braquial. Con el propósito de investigar el número y localización biométrica de los ramos primarios provenientes del nervio radial y puntos motores respecto un punto de referencia ubicado en la región del codo, se estudiaron 30 miembros superiores de individuos adultos brasileños, de la Universidad Estadual de Ciencias da Saúde de Alagoas, Maceió, Brasil. Las muestras se encontraban fijadas en solución de formaldehído al 10 %, de los cuales 15 miembros eran derechos y 15 izquierdos. Como punto de referencia se utilizó una línea que pasó a través de las partes más prominentes de los epicóndilos humerales, línea bi-epicondilea (LBE). Con respecto al origen nervioso para el músculo BR, todos los ramos se originaron a partir del nervio radial (NR). El promedio de la cantidad de Ramos Primarios (RP) fue de 1,53 (DS 0,73). En 18 muestras (60 %) se observó sólo un RP; en 8 casos (26,7 %) se encontraron 2 RP, mientras que en 4 casos (13,3 %) de la muestra se observaron 3 RP. Sobre la localización biométrica de los orígenes de los RP, es importante mencionar que todos se ubicaron proximal a la LBE. En promedio, estos se ubicaron a 38 mm (DS 0,9); 29 mm (DS 1,2) y 22 mm (DS 1,0) para el primer, segundo y tercer RP, respectivamente. En relación a los puntos motores (PM), en 4 casos (13 %) se observó 1 PM dado por la penetración directa de un ramo primario, en 13 casos (43 %) existieron 2 PM, en 8 casos (27 %) se encontraron 3 PM y en 5 casos (17 %) se observaron 4 PM. En tres casos (10 %) la inervación hacia el músculo BR emitió filetes nerviosos hacia el músculo extensor radial largo del carpo. Los resultados expuestos en esta investigación son un importante aporte para bloqueos nerviosos, estimulaciones eléctricas y transferencias nerviosas.

ABSTRACT This study aims to obtain an extract from red wine by using membrane-based supercritical fluid extraction. This technique involves the use of porous membranes as contactors during the dense gas extraction process from liquid matrices. In this work, a Cabernet Sauvignon wine extract was obtained from supercritical fluid extraction using pressurized carbon dioxide as solvent and a hollow fiber contactor as extraction setup. The process was continuously conducted at pressures between 12 and 18 MPa and temperatures ranged from 30 to 50ºC. Meanwhile, flow rates of feed wine and supercritical CO2 varied from 0.1 to 0.5 mL min-1 and from 60 to 80 mL min-1 (NCPT), respectively. From extraction assays, the highest extraction percentage value obtained from the total amount of phenolic compounds was 14% in only one extraction step at 18MPa and 35ºC. A summarized chemical characterization of the obtained extract is reported in this work; one of the main compounds in this extract could be a low molecular weight organic acid with aromatic structure and methyl and carboxyl groups. Finally, this preliminary characterization of this extract shows a remarkable ORAC value equal to 101737 ± 5324 µmol Trolox equivalents (TE) per 100 g of extract.

In Cesar, 30.7% of children under 5 years of age suffer from deficiencies of vitamin A, along with 13.4% for iron and 57.0% for zinc. Therefore, it is important to guarantee food security in the population through improvements in the nutritional quality of the offered food products. One alternative is the implementation of nutritionally improved crops. The production and consumption of four basic crops in the rural areas of five municipalities were characterized and compared to the implementation of the studied biofortified crops. Surveys regarding the purchase, consumption and production of cassava, bean, maize and rice were given to those responsible for food preparation and/or agricultural production in 90 families and was determined for these food ration consumed per person. In the week prior to the survey, 95.6% of the families consumed bean, 93.3% maize and 88.9% cassava and rice. The products mainly originated from purchases in the local store (bean and rice) or grown by the families (cassava). Cassava and maize were most commonly cultivated (71.1%), followed by bean (56.7%), maize (32.1%), and rice (2.2%). A 61.6% of the cultivated cassava, 23.5% of the maize, and 26.4% of the bean were destined for self-consumption, while the rest was sold or traded. Looking at the difference between the nutritional content of the biofortified products and the traditional and eating habits indicated that the substitution of the traditional varieties with the biofortified crops represented a possible intake increase of 44.59 mg/ person-day of iron, 24.05 mg/person-day of zinc, and 1.62 mg/ person-day of vitamin A. The substitution with and exclusive consumption of biofortified crops would contribute 199, 169, and 77% iron, zinc, and vitamin A based on the estimated average requirement. Due to their potential nutritional impact, the study of the adaptability and acceptability of biofortified crops is recommended.

La expansión sostenible del cultivo de fríjol requiere el desarrollo de tecnologías que no limiten sus propiedades fito-recuperadoras. En consecuencia, el objetivo del estudio fue proponer un manejo agronómico de conservación del cultivo de fríjol, considerando las características edafológicas y microbiológicas de dos mega-ambientes del Caribe colombiano y, la compatibilidad entre agroquímicos y bioinsumos. La metodología incluyó recuento de poblaciones microbianas rizosféricas; identificación de hongos fitopatógenos en tejido vegetal y suelo; estudio de compatibilidad de pesticidas con biocontroladores; y determinación del contenido de residuos de pesticidas en semillas de fríjol. Las poblaciones microbianas correspondieron a los registrados previamente para suelos del trópico bajo, pero con diferencias cuantitativas de géneros. Phytophthora, Colletotrichum y Fusarium fueron registrados en el Caribe húmedo mientras se identificaron Colletotrichum y Curvularia en el Caribe seco. El bioinsumo Beauveria no fue compatible con los agroquímicos ensayados, mientras que Trichoderma fue compatible con clorpirifos, tiabendazol y oxicarboxin, y Metarhizium con glifosato y oxicarboxin al 10% de la dosis recomendada. Se identificó la presencia de residuos de lindano en semillas cosechadas en tres localidades. El uso combinado de agroquímicos y bioinsumos en el cultivo de fríjol es factible, siempre y cuando el momento de aplicación del último sea acorde a la vida media del químico y se incremente el contenido de materia orgánica del suelo.

The sustainable expansion of bean cultivations requires technologies that do not limit their phyto-recovering properties. Therefore, the objective of this study was to propose agronomic management of conservation for bean cultivation considering the microbiological characteristics of two mega-environments of the Colombian Caribbean coast and the compatibility between agrochemicals and bioinputs. The methodology included rhizospheric microbe population counts, identification of phytopathogenic fungi in plant tissues and soils, compatibility studies of pesticides with biocontrollers, and determination of residual contents of pesticides in bean seeds. The microbial populations corresponded to those previously registered for the lower tropics, but with quantitative differences in the genera. Phytophthora, Colletotrichum and Fusarium were registered in the humid Caribbean, while Colletotrichum and Curvularia affected crops in the dry Caribbean. The Beauveria bioinput was not compatible with the evaluated agrochemicals, while Trichoderma was compatible with chlorpyrifos, thiabendazole and oxycarboxin. Metarhizium was compatible with glyphosate and oxycarboxin at 10% of the recommended dose. Lindane residues were found in the beans harvested at three of the studied locations. The combined use of agrochemicals and bioinputs on bean crops is feasible as long as the time of application of the latter is made according to the half-life of the chemical and the organic matter content of the soil is increased.

Las deficiencias nutricionales son comunes entre los niños colombianos y se requieren estrategias y suplementos innovadores para direccionar apropiadamente este problema. Por ejemplo, en Colombia, los depósitos de hierro según ferritina muestran un déficit del 58,2% en niños de dos a ocho años. Si se realiza una formulación con ingredientes de alto valor nutricional, las galletas tendrán potencial para su uso como suplementos dietarios en los niños debido a la simplicidad en su elaboración, durabilidad y aceptabilidad. Este estudio tiene como fin el desarrollo de galletas biofortificadas para niños, a partir de una mezcla de harinas de fríjol, yuca y trigo. La metodología, agrupó un conjunto de ensayos para definir el mejor tratamiento para la producción de harina de fríjol y la mezcla para la formulación de la galleta priorizando el contenido nutricional, calidad microbiológica y sensorial. Se obtuvo un procedimiento para la elaboración de harina de fríjol con características adecuadas a nivel nutricional, microbiológico y sensorial, utilizable en la elaboración de galletas. Las características reológicas de la mezcla de harinas propuesta también permiten otros posibles usos en la industria panificadora, sustituyendo la harina de cereal por harinas de alto contenido de micronutrientes. Sin embargo, se requieren estudios minuciosos en los niños para determinar el efecto de la ingesta regular de las galletas.

Nutritional deficiencies are common among children in Colombia, and innovative strategies and supplements are needed in order to effectively address this problem. For example, in Colombia, when measured as ferritin, iron deposits are deficient in 58.2% of children between two and eight years of age. If a formulation is made with highly nutritional ingredients, cookies will have the potential to be used as supplements in children's diets because of their simple manufacturing process, long shelf life, and high acceptability. This study aimed to develop biofortified cookies, based on a bean-cassava-wheat flour mix, for children. The methodology grouped several studies in order to define the best treatment for the production of bean flour and the flour mix to produce cookies, prioritizing the nutritional content and the microbiological and sensorial quality. A production procedure for bean-based flour, suitable for the production of cookies with adequate nutritional, sensorial and microbiological characteristics was obtained. Additionally, the rheological characteristics of the proposed flour mixes permitted other possible uses for the bread-making industry, substituting cereal flours with flours with higher micronutrient contents. However, further studies are needed to determine the nutritional effects of the regular ingestion of biofortified cookies on children.

Neste trabalho foram estudadas modificações da superfície de alumina com óxidos de metais alcalino-terrosos, usando o método dos precursores poliméricos. Os compostos modificados foram caracterizados por difração de raios X, adsorção-dessorção de nitrogênio e microscopia eletrônica de varredura. As propriedades catalíticas desses novos catalisadores foram avaliadas para a reação de transesterificação de óleo de babaçu. Foi observado que a reação de transesterificação de óleo de babaçu com metanol ocorreu com sucesso na presença das aluminas modificadas.

In this study, modifications of alumina surface with of alkaline earth metal oxides were studied, using the polymeric precursor method. The modified compounds were characterized by X-ray diffraction, nitrogen adsorption-desorption and scanning electron microscopy. The catalytical properties of these new catalysts were evaluated for the transesterification reaction of babassu oil. It is observed that the transesterification reaction of babassu oil with methanol was successfully carried out using the modified alumina samples.

Propane oxidation and reduction of NO to N2 with propane under oxidative conditions on a Cu-Al-MCM-41 mesoporous molecular sieve and Cu-ZSM-5 zeolites were studied. Both types of catalysts were prepared by ion exchange in aqueous solutions of copper acetate and characterised by X-ray diffraction (XRD), nitrogen sorption measurement, diffuse reflectance ultra-violet spectroscopy (DRS-UV), diffuse reflectance infra-red Fourier transform spectroscopy (DRIFTS) of the adsorption of CO on Cu+ and temperature-programmed reduction with hydrogen (H2-TPR). The NO reduction was performed between 200 and 500 ºC using a GHSV = 42,000 h-1. H2-TPR data showed that in the prepared Cu-Al-MCM-41 all the Cu atoms are on the surface of the mesopores as highly dispersed CuO, which results in a decrease in specific surface area and in mesopore volume. H2-TPR together with DRIFTS data provided evidence that in Cu/ZSM-5 catalysts, Cu atoms are found as two different Cu2+ cations: Cualpha2+ and Cubeta2+, which are located on charge compensation sites, and their thermo-redox properties were different from those of Cu atoms in Cu-Al-MCM-41. The specific activity of the Cu2+ exchangeable cations in Cu-ZSM-5, irrespective of their nature, was much greater than that of the Cu2+ in Cu-Al-MCM-41, where they are found as CuO.

Graft copolymers of vinylacetate on secondary cellulosic fiber were prepared by the use of iron(II)-hydrogen peroxide redox system as initiator, in aqueous medium. The graft copolymers were characterized by FT-IR spectroscopy, scanning electron microscopy, and thermogravimetric analysis. The following parameters of the copolymerization reaction were studied: cellulose: vinylacetate reagents ratio, concentration Fe+2-H2O2, pH, temperature and time of reaction. Their effects on the system are also discussed. The grafting percent higher than 100% were obtained in the best condition of reation, with a heterogeneous distribution of synthetic polymer over the fiber surface

Se prepararon copolímeros por injerto de acetato de vinilo en fibra celulósica secundaria, usando como iniciador el sistema redox: ion ferroso-peróxido de hidrógeno, en medio acuoso. Los copolímeros se caracterizaron por espectroscopía infrarroja, microscopía electrónica de barrido y termogravimetría. Las variables de la reacción de copolimerización que fueron investigadas son: relación de concentración de celulosa y acetato de vinilo; concentración de Fe+2-H2O2, pH, temperatura y tiempo de reacción. Se discuten sus efectos en el sistema estudiado. Los porcentajes de injerto superiores al 100% se obtuvieron en las condiciones óptimas de la reacción de polimerización, con una distribución heterogénea del polímero sintético en la superficie de las fibras

Os autores resumem os conhecimentos atuais sobre eliptocitose normal e patologica. Apresentam 20 verificações em individuos normais, cujos resultados mostraram uma excentricidade menor que a descrita por autores europeus: 2.000 hematias em 20 individuos normais. I 71, II 26, III 3, IV 0, I.E. 1,06, E.E. 3. Confirmaram a hipereliptocitose na anemia perniciosa. Descrevem um caso de hiperexcentricidade constitucional, cujo resultado manteve-se constante durante 5 anos. Por fim descrevem em um caso fatal de leucemia reticulo-endotelial uma hiperexcentricidade bastante acentuada: 300 hematias observadas I 14, II 27, III 35, IV 24, I.E. 5,63, E.E. 59. Medindo a excentricidade das hematias apresentadas em microfotografias e desenhos de diversos trabalhos referentes á leucemia monocitica ou reticulo-endotelial, verificaram no resultado global uma hiperexcentricidade bem nitida.

The authors summarize all that is known at the present time about normal and pathological eliptocytosis. They present 20 observations of normal persons, the results of which showed a smaller excentricity than that described by the European authors: 2000 red cells in 20 normal persons. I 71, II 26, III 3, IV 0, I.E. 1,06, E.E. 3. They reassured the fact of a hypereliptocytosis in pernicious anemia. A case of constitutional hyperexcentricity is detailed in which the result was constant during 5 years. Lastly they describe in a fatal case of reticulo-endothelial leucemia a highly pronounced hyperexcentricity: 300 red cells observed I 14, II 27, III 35, IV 24, I.E. 5,63, E.E. 59. Measuring the excentricity of the red cells shown in the microphotographs and sketches of several papers dealing with monocytic or reticulo-endothelial leucemia, the authors verified in the final result, a very clear hiperexcentricity.